Faced with growing demands in terms of insulation and new trends in cladding, Isosystems now offers Isosystems “Stone” WallBase solutions to those who wish to choose Hainaut Blue Stone to adorn and insulate their facades or basements.
The professional solution for insulating and upgrading a building in the blink of an eye
The Isosystems “Stone Wall” Base 2-in-1 solution enables the facade to be clad in a single operation with top-of-the-range Hainaut Blue Stone® cladding and a high-performance polyurethane insulation layer.
WallBase is ready to use, quick and easy to install by a building professional, and consists of blue stone slabs or plates set in rigid panels of polyurethane foam.
The panels are mechanically fastened with screws through the joints. The final assembly results in a visually appealing, high-quality façade cladding.
This system can be combined with rigid insulation panels (PUR, PIR, Resol, XPS, EPS, glass wool, rock wool, …) to achieve a total insulation thickness of up to 18 cm and the required insulation level for the external wall, including passive standards (U = 0.15 W/m².K for external walls).
Building or renovating made easy
Isosystems “Stone” WallBase is particularly suitable for cladding large wall surfaces and for projects with few cut-outs, both for renovation and new construction projects. It can be installed on the facade, at the base of a building, or on the ceiling or overhang of a building.
The stone, set in the insulation, is inseparable.
The entire system is delivered ready for use on site, including all fixing accessories, allowing the installer to get straight to work.
Presentation and installation instruction of the WallBase system:
|Reaction to fire class determined in accordance with NBN EN ISO 13501-1||B-s1,d0|
|Watertightness (resistance to driving rain)||no infiltration|
|Resistance to water vapour diffusion||~250 µ|
|Resistance to heat-rain & heat-cold cycles followed by freeze-thaw cycles||konform|
|Bonding strength of the stones in the foam||>0,08 N/mm²|
|Pull-trough strength of fixings||>500N/Befestigungspunkt|
|Thermal conductivity (λD)||0,029 W/m.K|
Reaction to fire class determined in accordance with NBN EN ISO 13501-1
Watertightness (resistance to driving rain)
- no infiltration
Resistance to water vapour diffusion
- ~250 µ
Resistance to heat-rain & heat-cold cycles followed by freeze-thaw cycles
Bonding strength of the stones in the foam
- >0,08 N/mm²
Pull-trough strength of fixings
Thermal conductivity (λD)
- 0,029 W/m.K